How to Use the InFizz Bottles for Sparkling Water

Quick Answer

To use the InFizz Bottles 1L, fill with cold water, attach to your Breville InFizz Aqua or Fusion, carbonate, and seal tightly. Avoid overfilling and always use cold water for best fizz.

Step-by-Step Instructions

1. Fill with Cold Water: Fill the InFizz Bottle with cold tap or filtered water up to the fill line (do not exceed). Cold water holds carbonation better than warm water. Common mistake: Overfilling can cause poor carbonation or leaks. Always stop at the fill line.
2. Attach to the Carbonating Head: Screw the bottle onto the carbonating head of your InFizz Aqua or Fusion until it is snug. Ensure the bottle is upright and stable. Common mistake: A loose attachment can cause gas to escape. Tighten firmly but do not overtighten.
3. Carbonate the Water: Press the carbonating button or lever (depending on your model) for 2-3 seconds. Release and repeat if you want more fizz. Do not hold continuously. Common mistake: Holding the button too long can over-carbonate and cause excessive foam. Short bursts are safer.
4. Remove and Seal: Unscrew the bottle from the carbonating head. Immediately screw on the cap provided with the InFizz Bottle. Turn it until you hear a click or feel resistance. Common mistake: Delaying the cap seal lets carbonation escape. Seal right away for maximum fizz.
5. Store or Serve: Store the sealed bottle in the refrigerator for up to a few days. To serve, gently open the cap to release pressure slowly. Common mistake: Opening too quickly can cause a geyser. Twist the cap slowly to release gas gradually.

Product Facts

• the InFizz™ Bottles 1L - 2 Pack: 2x 1L BPA-free* carbonating bottles compatible with InFizz Aqua and InFizz Fusion (BCA600/BCA800). You get two bottles to keep a steady supply of sparkling water ready, and the BPA-free* construction means safe daily use.