The honest starting point: no printed dose in the record
If you are searching for an exact milliliter dose of Eco Milk Frother Cleaner per cleaning, the supplied product record does not include one. The record confirms what the product is for — cleaning milk frothers and steam wands — and that the package contains two 120 ml bottles. It does not supply a measured amount per use, a dilution ratio, or a contact time.
That absence matters. Rather than invent a number that could be too weak to cut milk residue or too wasteful for a small bottle, treat the bottle itself as the unit of supply and build a routine around visible residue and smell. The two 120 ml bottles are the only quantity the record confirms, so plan your frequency around how quickly you actually go through them.
What the Eco Milk Frother Cleaner record confirms
- Eco Milk Frother Cleaner: Two 120 ml bottles are included in the package. This is the only confirmed quantity. It sets the supply you have to work with, so your cleaning frequency should be judged against how long those two bottles last.

Eco Milk Frother Cleaner - Eco Milk Frother Cleaner: The cleaner is specifically formulated for cleaning milk frothers and steam wands. This confirms compatibility with the two milk-contact surfaces that matter most: the frothing jug or chamber and the steam wand.
- Eco Milk Frother Cleaner: It is described as an eco-friendly cleaning solution for espresso equipment. If you are choosing a cleaner partly for environmental reasons, this is the product's stated positioning — but the record does not list ingredients or certifications, so treat 'eco-friendly' as a label, not a verified claim.
- Eco Milk Frother Cleaner: It helps maintain the performance and hygiene of your frother. This is the outcome the product is sold for. It supports regular cleaning as maintenance, not as a repair for a frother that is already malfunctioning.
How to judge the amount without a printed dose
Because no measured dose is supplied, the practical approach is to start small and add only if residue remains after cleaning. A small amount of cleaner on a cloth or in the jug, worked over the milk-contact surfaces, lets you see whether it is lifting the film before you commit more. If the surface still feels slick or smells of milk after rinsing, repeat with a little more rather than pouring freely.
This conserves the two 120 ml bottles and avoids overusing a product whose dilution guidance is not confirmed. It also keeps the process reversible: you can always add cleaner, but you cannot un-pour it. The record does not state whether the cleaner needs dilution, so do not assume it should be mixed with water unless you have separate confirmation.
A residue-led cleaning routine for the frother jug and steam wand
The sequence below uses only what the record supports: the cleaner is for milk frothers and steam wands, and it is supplied in two 120 ml bottles. It does not prescribe temperatures, soak times, or scrubbing tools, because those are not confirmed.
- Clean after every milk session: Milk residue sets quickly. Wipe or rinse the jug and purge the steam wand as soon as you finish frothing, before residue dries. This is general kitchen practice, not a manufacturer instruction from the supplied record.
- Apply a small amount of Eco Milk Frother Cleaner: Start with a modest amount on the milk-contact surfaces. The record gives no measured dose, so let visible residue guide you rather than a fixed volume.
- Work it into the jug and wand: Cover the areas where milk film collects. The record confirms the cleaner is formulated for frothers and steam wands, so both are appropriate targets.
- Rinse thoroughly: Rinse until the surface no longer feels slick and no cleaner smell remains. The record does not specify a rinse volume or method, so use your judgment and repeat if needed.
- Dry and inspect: Check for remaining film or odor. If either persists, repeat with a little more cleaner rather than assuming the product has failed.
How often to clean: let use and residue set the frequency
The record does not give a cleaning interval, so any schedule has to come from your own use. These signals are more reliable than a calendar.
- Daily frothing: If you froth milk every day, a quick rinse and wand purge after each use plus a cleaner pass when you notice film is a reasonable rhythm. The two 120 ml bottles are your supply check: if they run out faster than expected, you are either cleaning more often or using more per clean than you need.
- Occasional frothing: If you froth a few times a week, clean after each session and use the cleaner when residue is visible or the jug smells sour. Stored milk residue can develop odor even between uses.
- Visible film or dullness: A slick coating on the jug or a dull steam wand is a direct cue to clean with the Eco Milk Frother Cleaner, regardless of how long it has been since the last clean.
- Sour or stale smell: Odor is a sign that milk proteins have not been fully removed. Clean and rinse until the smell is gone.
What the record does not tell you — and why that is not a flaw
The supplied information does not include a dosage, dilution ratio, contact time, temperature, or rinsing procedure. It also does not list ingredients, safety certifications, or surface compatibility beyond milk frothers and steam wands. That means you should not treat this article as a manufacturer's instruction sheet.
What the record does give you is enough to make a sensible decision: the cleaner is purpose-made for frothers and steam wands, it comes in two 120 ml bottles, and it is positioned as eco-friendly. If you need exact dosing for a commercial setting or a documented safety sheet, ask the retailer or check the bottle label before relying on this article alone.

