Start with the mode, not the number
The Smart Grinder Pro is built around two dosing modes: cups for French press or filter, and shots for espresso. Choosing the mode first tells the grinder what kind of dose you are making, so you are not hunting through 60 settings without a reference point. The grind setting then fine-tunes the result within that mode.
That order matters. If you begin with a random number and try to force it to fit your brewer, you will spend more time re-dosing than drinking. Pick the mode that matches your brew method, then adjust the grind setting in small steps until the cup tastes right.
How to dial in each brew method
Use this sequence for any brew method. The grinder's 60 settings give you room to move, but the mode choice keeps you in the right range from the start.
- French press: Select cups mode, then choose a grind setting on the coarse side of the range. French press needs a coarser grind than filter or espresso, so start coarse and only move finer if the brew drains too quickly or tastes thin.
- Filter or drip coffee: Stay in cups mode and move the grind setting finer than your French press setting. Drip coffee grind size sits between French press and espresso; adjust one step at a time until the brew time and taste feel balanced.
- Espresso: Switch to shots mode. Espresso grind setting needs to be much finer than either cups-mode setting, so expect to move several steps finer. Grind directly into your portafilter, then adjust the setting in small increments until the shot runs the way you want.
What the Smart Grinder Pro gives you to work with
- the Smart Grinder™ Pro: 60 unique grind settings on a programmable conical burr grinder. Enough range to cover French press, filter, and espresso without changing equipment, but small enough steps to make dialing in practical.

the Smart Grinder™ Pro - the Smart Grinder™ Pro: Cups mode for French press or filter, and shots mode for espresso. The mode sets the dose logic for the brew style, so you start in the right neighborhood before touching the grind number.
- the Smart Grinder™ Pro: Grind directly into a portafilter or an air-tight container. You can grind straight into the portafilter for espresso or into a container for batch filter brewing, which keeps the workflow matched to the method.
A simple coffee grind size chart for this grinder
Treat this as a starting order, not fixed numbers. The Smart Grinder Pro's settings are relative, and the right number depends on your beans, your brewer, and your taste. Move one step at a time and taste between adjustments.
- Coarsest end: French press. Use cups mode and start coarse. If the press is hard to plunge or the cup is muddy, move one step coarser.
- Middle range: Drip and filter coffee. Use cups mode and move finer than French press. If the brew drains too slowly or tastes bitter, back off one step.
- Finest end: Espresso. Use shots mode and grind into the portafilter. If the shot runs too fast or tastes sour, move finer; if it runs too slow or tastes bitter, move coarser.
Why the same setting can taste different tomorrow
Coffee changes as it rests, and a setting that worked last week may need a small nudge as beans age. The Smart Grinder Pro's 60 settings give you the resolution to make that nudge without jumping to a completely different range. Change one step, brew, and taste before changing again.
If you switch between brew methods often, note the mode and setting you used for each. That record turns the dial guide into a personal reference, so you spend less time re-dialing and more time brewing.
What to do when the supplied information runs out
The supplied product record covers the two modes and the 60 settings, but it does not list a numbered chart mapping each setting to a specific brew method. That means any exact number you see elsewhere is someone else's starting point, not a manufacturer rule. Use the mode first, then adjust by taste and brew behavior.
The record also does not include cleaning, calibration, or burr-care steps for this model. If you need those procedures, check the documentation that came with your grinder rather than guessing. For grind selection, the mode-plus-adjust method above is enough to get you brewing.

