ClaroSwiss Water Filter: Installation and Benefits

Quick answer

Installing the ClaroSwiss water filter in your compatible Breville system takes just minutes and delivers noticeably cleaner, fresher-tasting water.

How to install the ClaroSwiss water filter

1. 1. Turn off and unplug your Breville system: Safety first. Make sure the appliance is powered down and disconnected from the mains before you begin. Never work on a powered appliance.
2. 2. Locate the filter compartment: Open the water tank lid and find the small compartment designed for the ClaroSwiss filter. It is usually near the tank's base or inside the lid. Check your model's manual if you cannot find it; the location varies.
3. 3. Remove the old filter (if present): Twist the old filter counterclockwise and pull it out. Dispose of it according to local recycling guidelines. Do not reuse old filters – they lose effectiveness over time.
4. 4. Prepare the new ClaroSwiss filter: Remove the protective cap from the new filter. Rinse it under cool running water for about 10 seconds to remove any loose carbon dust. Skipping the rinse can cause black specks in your first batch of water.
5. 5. Insert and secure the new filter: Align the filter with the slot and push it in. Twist clockwise until it clicks into place. It should sit flush. If it doesn't click, it may not be seated correctly – remove and try again.
6. 6. Flush the system: Fill the tank with fresh water and run a full cycle (or dispense about 1 liter) without using the water for drinking or cooking. This clears any remaining dust. The first batch may look cloudy – that's normal. Discard it.
7. 7. Reset the filter indicator (if your model has one): Press and hold the filter reset button (usually on the control panel) for 3 seconds until the indicator light turns off or changes color. Forgetting this step means the machine will still show the old filter as expired.

Product details

• Filtro de agua ClaroSwiss: Compatible with select Breville water systems for easy integration. You don't need a separate filtration setup; this filter clips right into your existing Breville machine.

  

• Filtro de agua ClaroSwiss: Simple to install and replace, ensuring minimal disruption to your daily routine. Swapping filters takes seconds, so you can maintain great water quality without hassle.